It’s not a communication protocol like SPI and I2C, but a physical circuit in a microcontroller, or a stand-alone IC. This can do UART, but also a synchronous protocol. Habilitar o acesso do modo de usuário a GPIO, I2C e SPI Enable user mode access to GPIO, I2C, and SPI. 166 . O Windows 10 contém novas APIs para acesso direto do modo de usuário do GPIO (entrada/saída de uso geral), de um circuito integrado (I2C), de uma SPI (interface de periférico serial) e do UART (Universal assíncrona) transmissor. Hello , I've bought a YSUMA-341A. I made it using i2c, but I found VCU108 has direct uart port. Universal Asynchronous Receiver-Transmitter (UART) Maxim provides the industry's smallest and most advanced family of SPI/I 2 C (I2C) UARTs. Currently, UART, SPI and I2C are the common hardware interfaces people use in microcontroller development. USB to I2C Example using the FT232H and FT201X devices Version 1.0 Issue Date: 2013-09-30 FTDI have a range of devices which can be used to interface I2C devices to a host computer over USB. UART (RS232) to SPI / I2C / ADC / GPIO Converter Bridge Nov-18 Page 5 of 8 • 1NOCS - Takes the relevant CS output high (i.e. Synchronous protocols either need a higher bandwidth, like in the case of Manchester encoding, or an extra wire for the clock, like SPI and I2C. Seriële protocollen – USART / UART / RS-232 / USB / I2C / SPI Binnen elektronica en vooral bij het werken met computers en met name met verschillende PCB’s (Printed Circuit Boards) komen we vaak verschillende interfaces tegen. These include both I2C Master 2and I C Slave solutions. You’ll probably find yourself using I2C if you ever build projects that use OLED displays , barometric pressure sensors , or gyroscope/accelerometer modules. USB to I2C Example using the FT232H and FT201X devices Version 1.0 Issue Date: 2013-09-30 FTDI have a range of devices which can be used to interface I2C devices to a host computer over USB. Go Down. Re: How to convert uart to i2c Jump to solution If I understand what you want to do, you want to implement both an I2C and a UART interface in the Virtex 7 FPGA of your board and pass data received on one of them to the other. This application note provides information to assist engineers in designing [SWS_Lin_00063] ⌈It is intended to support the complete range of LIN hardware from a simple SCI/UART to a complex LIN hardware controller. The circuits are in UART mode by default. So far, we’ve talked about the basics of SPI communication and UART communication, so now let’s go into the final protocol of this series, the Inter-Integrated Circuit, or I2C.